🧱 Graffiti Resin Epoxy Floor Paint SF 120 Solvent-Free (Colored) 21 kg
GR – Epoxy Floor SF 120 | Solvent-Free Epoxy Flooring
✨ Two-component solvent-free epoxy floor paint (100% Solids – Low VOC)
Specifically designed to provide the highest mechanical and chemical resistance with a durable, easy-to-clean semi-gloss finish, it is the ideal choice for floors exposed to high loads and harsh chemicals.
It is used in factories, hospitals, laboratories, warehouses, treatment plants, and parking lots to provide long-lasting protection and high-level professional performance.
✅ Key Features
🌿 Solvent-free (Low VOC)
🛡️ Very high resistance to friction and abrasion
🧪 Excellent resistance to acids, alkalis, and salts
🔗 High adhesion strength to concrete
✨ Elegant semi-gloss finish and easy to clean
🧼 Hygienic surface with low dirt absorption
🚶♂️ Non-slip surface
⚙️ Suitable for indoor and outdoor applications
🎨 Available in several colors
🛠️ Uses
🏭 Heavy and light factories
🏥 Hospitals and laboratories
🧪 Research Laboratories
🚗 Parking
📦 Warehouses and Storage
🧱 Concrete floors exposed to chemicals
🛢️ Liquid and oil storage areas
🚉 Transport stations and industrial areas
⚙️ How to use it
1️⃣ Clean the surface thoroughly from dust, oils, and dirt.
2️⃣ Make sure that the moisture content on the surface is less than 5%.
3️⃣ Treating cracks and joints using GR-Epoxy Putty.
4️⃣ Apply a primer layer of GR-Epoxy Primer SF 101.
5️⃣ Mix the two ingredients in the following ratio:
👉 (A:6 B:1)
6️⃣ Mix using a slow mixer until completely homogeneous.
7️⃣ Application using a roller or spray machine.
8️⃣ A second layer can be applied after the first layer has dried to increase thickness and protection.
📊 Brief technical details
✨ Finish: Semi-gloss
🎨 Color: Colorful
⚖️ Viscosity: 120 ± 0.05 KU
⚖️ Density: 1.35 ± 0.05 kg/L
💎 Solids content: 100%
📏 Dry layer thickness: 200 microns – 1 mm
📐 Consumption rate: 250 g/m² at a thickness of 180 microns
⏱️ Operating time (Pot Life): 45 minutes at 25°C
🕒 Initial time of dryness: 4 hours
🧱 Final drying: 20-24 hours
💪 Full strength: 7 days
🧴 Mixing ratio: 6 parts A : 1 part B
🌡️ Minimum application temperature: 5°C
🪣 Packaging: Kit 18 kg (A + B)
⚠️ Safety Guidelines
🌬️ Use in well-ventilated areas
🧤 It is recommended to wear gloves during application
👁️ If it comes into contact with the eye, rinse immediately with plenty of water.
🚫 Do not inhale the vapors directly
🧯 Keep away from sources of flame and heat
📦 Storage and expiry
🏠 Store in a dry, shaded place at a temperature not exceeding 25°C
🔒 Close tightly after use
🕒 Shelf life: 12 months from the date of production
