Graffiti Resin Casting Resin 18 kg
– Thick Pour Resin for Professional Applications
Graffiti Casting Resin from Graffiti Resin is a high-quality professional-grade resin specifically designed for deep and large casting projects such as river tables, thick art sculptures, and luxury decorative pieces.
It features crystal-clear transparency, strong UV resistance, and excellent flow properties that provide a smooth surface free from bubbles and imperfections.
This product is intended for professional users and engineered to deliver perfect results in high-thickness applications. It is considered one of the best deep-pour resins in the Saudi market.
- 🔹 Key FeaturesUltra-high transparency – Crystal Clear
- UV Resistant – prevents yellowing
- Self-Leveling for a flawless finish
- Smooth, water-like consistency with excellent flow
- Bubble-free when used correctly
- Long-term yellowing resistance
- Compatible only with alcohol inks and metallic resin pigments
📊 Technical Specifications
- Mixing Ratio: 2:1 (100 g of Part A requires 50 g of Part B)
- Open Working Time: up to 2 hours
- Initial Cure Time: 48 hours
- Full Cure Time: 72 hours
- Ideal Working Temperature: not less than 18°C
- Optimal Pour Depth: 2.5 cm to 8 cm per pour
- Density Calculation:
- 1 mm thickness on 1 m² = approx. 1.1 kg of resin
- Example: 30 mm (3 cm) thickness over 1 m² requires approx. 3.3 kg of resin
🛠 How to Use
- Calculate the required amount of resin accurately using the above formula.
- Mix Part A and Part B at a ratio of 2:1 using an electric mixer for up to 5 minutes, ensuring the mixer reaches all edges of the mixing container.
- Let the mixture rest for 5 minutes, then mix again for 3 minutes to ensure complete homogenization.
- Allow the mixture to sit for 10 minutes to release any air bubbles.
During pouring:
- Pour slowly and from a very close distance to the surface to avoid air entrapment.
- Leave it for 10 minutes, then gently pass a heat torch over the surface to remove bubbles, avoiding direct heat exposure.
Mold Preparation:
Ensure the mold or wooden frame used for casting is perfectly level, sealed, clean, and free from any cracks or openings, as the resin has a water-like consistency and may leak through even the smallest gaps.
Post-Pour Monitoring:
Check the surface every 30 minutes during the first 3 hours, especially with wooden inserts or embedded objects.
Ideal Environment:
Place the project in a cool, enclosed room free from dust and humidity, at a temperature not lower than 18°C.
💡 Tips for Best Results
- Add a few drops of light blue alcohol ink to enhance transparency and reduce yellowing over time.
- Always use clean and dry tools.
- Do not mix at high speed to prevent air buildup.
- Do not apply direct flame to the resin when using a torch.
- Avoid moving the mold after pouring.
⚠️ Usage Restrictions (Important)
🚫 Not suitable for small molds or fine-detail projects.
🚫 Not for use in hot environments or poorly ventilated spaces.
🚫 Not to be used for flooring applications.
🚫 Not suitable for pours under 2 cm thickness.
🚫 Do not use with acrylic, water-based, oil-based, or lead-containing pigments.
🚫 Do not pour over wet or unsealed wood.
🚫 Not suitable for fresh natural flowers.
🚫 Avoid using worn or low-quality silicone molds.
🚫 Do not mix manually – electric mixer preferred.
If no mixer is available, mix for an extended period and ensure complete homogenization to avoid uncured streaks at the bottom of the project.
👤 Who Can Use This Product?
✔️ Artisans and large table designers
✔️ Professional resin artists
✔️ Art workshops and décor manufacturers
✔️ Commercial and high-end production projects
Graffiti Casting Resin is intended exclusively for large-scale and professional work, not for small molds or basic DIY projects.
